Vertiv | Liebert® GXT5™ | Installer/User Guide 67
• UPS fault = The contacts switch when a UPS fault has occurred (default)
Dry contact 1 (Input)
Selects the action taken by the UPS when the input of dry-contact 1 is triggered.
• Disable (default)
• Battery mode shutdown = If the UPS is running on batteries and this input is triggered, the UPS
shuts down
• Any mode shutdown = If this input is triggered, the UPS shuts down regardless of current operating
mode
•
Maintenance mode = For 16&20kVA model, If this input is triggered, it means the UPS is
in Maintenance mode.
Dry contact 2 (Input)
Selects the action taken by the UPS when the input of dry-contact 2 is triggered.
• Disable (default)
• Battery mode shutdown = If the UPS is running on batteries and this input is triggered, the UPS
shuts
down
• Any mode shutdown = If this input is triggered, the UPS shuts down regardless of current
operating mode
• Maintenance mode = For 16&20kVA model, If this input is triggered, it means the UPS is in
Maintenance mode.
Sleep mode
Allows the UPS to turn off the output on a weekly schedule. For instance, turn on every Monday at 01:00
and off every Friday at 23:00.
• Enable
• Disable (default)
Power on day of week
Sets the day of week to turn on the UPS. This option is only shown when sleep mode is enabled.
• Sunday-Saturday (default Monday)
Sets the time of day to power on the UPS on the selected day. This option is only shown when sleep
mode is enabled.
• 00:00 - 23:59 (default 00:00)
Power o day of week
Sets the day of week to turn o the UPS. This option is only shown when sleep mode is enabled.
• Sunday-Saturday (Default is Saturday.)
Power on time
To Next Page
Loading...
Need help?
General
