Gocator Line Profile Sensors: User Manual
Gocator Accelerator • 351
To accelerate a sensor using the Gocator Accelerator utility:
1. Power up the sensor system you want to accelerate.
2. Launch the Gocator Accelerator utility.
3. If a Windows Security alert asks whether you want to allow GoAccelerator.exe to communicate on networks,
make sure Public and Private are checked, and then click Allow Access.
4. In the Sensors list, click the sensor you want to accelerate.
If you do not see the sensor, you may need to wait a few seconds and then click the Refresh button ( ).
In multi-sensor systems, only the Main sensor is listed.
5. (Optional) In the IP drop-down, choose an IP or choose Any to let the application choose.
6. (Optional) Set Web Port to a port for use with the accelerated sensor's URL.
If port 8080 is already in use, set Web Port to an unused port.
To Next Page
Loading...
Need help?
General
