Logicube Forensic Falcon™ User’s Manual 142
13: SCSI Module
13.0 SCSI Module - Introduction
The optional Falcon SCSI Module expands the capability of the Falcon by providing support for
imaging from and to SCSI hard drives. The SCSI module can connect to 68-pin SCSI drives
natively. Optional adapters are available for use with 80-pin and 50-pin SCSI drives.
The Falcon SCSI module provides 1 SCSI write-protected Source port and 1 SCSI Destination port.
It supports all of the Falcon features including encryption, wipe, task macro, drive spanning,
logs, parallel imaging, concurrent image+verify, and multi-tasking.
In the box:
Power supply & power cord
2 SCSI drive data cables (CBL-031A)
2 SCSI drive power cables (CBL-EXT-PWR-04)
Optional 50-pin and 80-pin SCSI adapters are available.
To Next Page
Loading...