Logicube Forensic Falcon User Manual

TYPES OF OPERATIONS
Logicube Forensic Falcon™ User’s Manual 67
6.0.3 Wipe / Format
This type of operation allows the user to erase, wipe, and/or
format one or more Destination drives. There are three main
settings: Secure Erase, Wipe Mode, and Format.
 Secure Erase – Sends a command to the drive instructing it to
perform a secure erase based on the drive manufacturer’s
specifications for the secure erase command.
 Wipe Patterns – Allows the user to set a specific pattern to use for
wiping the drive. The number of passes is customizable (up to 7
passes) along with the type of data written for each pass. In
addition, a 7-pass DoD wipe can be set with pre-selected pass
values.
 Format – Formats the Destination drive with an EXT4 file system or
NT file system (NTFS) with or without AES-256 encryption.
More information on encryption can be found in
Chapter 8.
There are three selections when performing a wipe: Destination, Settings, and
Case Info.
6.0.3.1 Destination
Tap this icon to choose a drive to erase, wipe,
and/or format.
A screen will appear, allowing the selection of one or more
destinations. Tap the drive(s) to be erased, wiped, and/or

Logicube Forensic Falcon Specifications

General

Brand	Logicube
Model	Forensic Falcon
Category	Storage
Language	English