Logicube Forensic Falcon User Manual

IMAGING
Logicube Forensic Falcon™ User’s Manual 43
when the image files are opened.
Tap any of the boxes and an on-screen keyboard will appear
allowing information to be entered. After entering the
information, tap the OK icon to go back to the previous screen.
Log names and file names can be customized
by entering a Case/File Name. For example, if
a DD or E01 image is performed, and the
Case/File Name is set to TestCase, the log
name and file name will be called TestCase.
Subsequent Case/File Names that are the
same will be identified with a dash, then the
next image number, for example, TestCase-1,
TestCase-2, etc.
The Falcon will convert any non-POSIX portable
characters used in Case/File Name field to
underscores “_“ when creating the log or file
names.
POSIX portable characters are:
Uppercase A to Z Period (.)

Logicube Forensic Falcon Specifications

General

Brand	Logicube
Model	Forensic Falcon
Category	Storage
Language	English