Logicube Forensic Falcon User Manual

TYPES OF OPERATIONS
Logicube Forensic Falcon™ User’s Manual 70
It is recommended to use the same
capacity drive per task. When smaller
capacity drives are wiped together
with larger capacity drives, the
smaller drives will finish first.
However, the drive bays will not be
available until the entire task is
finished.
Selecting this will open the
Wipe Mode screen showing 3
options:
 NONE – Choosing this will instruct the
Falcon not to perform a wipe using
Wipe Mode.
 DOD – Choosing this will instruct the
Falcon to perform a 7-pass wipe
conforming to the DoD M-5220
standards.
 CUSTOM – Choosing this will allow the
user to specify how many wipe passes
will be performed and what values each
pass will be written on each of the
passes selected.
This will open the HPA/DCO
option for wiping. If the drive
to be wiped has HPA and/or DCO that needs to
be wiped, select Yes for the corresponding

Logicube Forensic Falcon Specifications

General

Brand	Logicube
Model	Forensic Falcon
Category	Storage
Language	English