2.1. Tap Register Mode and select IP/Domain.
2.2. Name: Choose a name for your system of your choice.
2.3. Address: Enter the IP address or DDNS address of your device.
2.4. Client Port: Enter the Client Port (default: 35000).
2.5. Username: Enter the system’s User Name (default: admin).
2.6. Password: Enter the system’s Password (default: 000000).
3. Tap Connect. You will be prompted to change the system password.
4. Enter a new 6 character password and tap OK. This password will be used to log on
to your system from now on.
5. The app opens in Live View and streams video from your cameras.
To Next Page
Loading...
