Lorex NR800 Series - Using Smart Search

Search (Playback)
13
13.4 Using Smart Search
Smart Search makes it easy to review motion events in specific zones of your video
stream. Select the areas that interest you and Smart Search plays your recording from
the time when your camera detects motion in those areas. To set up smart search:
1. In the multiple-channel playback mode, double-click a channel and then click the
Smart Search icon
.
2. To create a Smart Search zone, left-click and select the area that you want to detect
motion.
3. Repeat these steps for each channel that you want to use Smart Search.
4. Click
to start the Smart Search playback. To stop the Smart Search playback,
click
again.
#LX400021; r. 4.0/30344/30494; en-US
34