LSIS XEC-DR32H - Appendix 4 Instruction List; Appendix 4.4.10 Positioning Function Block

Chapter 7 Input/Output Specifications
2) Wiring of SLT-T40P and XGB extension modulet
Wiring of XGB extension module through SLP-T40P and SLT-CT101-XBE is as follows.
At this time, relationship of XGB IO signal and Smart link board terminal number is as follows.
The following figure describes signal allocation when SLT-CT101-XBE is used as connection cable.
When the user makes the cable, make sure that wring is done as figure below.
Pin No.
Terminal block Name
Terminal block board
(SLP-T40P)
7-30