Chapter 1 Introduction
(5) Optimized communication environment.
(a) With max. 2 channels of built-in COM (excl. loader), up to 2 channel communication is available without
any expanded of module.
(b) Supporting various protocols to improve the convenience (leaseddedicated, Modbus, user-defined
communication)
(c) Communication module may be additionally increased by adding modules (up to 2 rackstages such as
Cnet, Enet and etc).
(d) Convenient network-diagnostic function through network & communication frame monitoring.
(e) Convenient networking to upper systems through Enet or Cnet.
(f) High speed program upload and download by USB Port
(6) Applications expanded with a variety of I/O modules.
(a) 8, 16, 32 points modules provided (if relay output, 8/16 points module).
(b) Single input, single output and combined I/O modules supported.
(7) Applications expanded through analogue-exclusive dedicated register design and full attachable
mechanism.
(a) All analogue modules can be attachable on extension base. (H type: up to 10 racks stages available)
(b) With analogue exclusive dedicated register(U) and monitoring exclusive dedicated function, convenient
use for I/O is maximized (can designate operations using easy programming of U area and monitoring
function)
(8) Integrated programming environment
(a) XG 5000: intensified program convenience, diverse monitoring, diagnosis and editing function
(b) XG - PD: COM/network parameters setting, frame monitoring, protocol analysis function
(9) Built-in high speed counter function
(a) Providing high High-speed counter 1phase, 2phase and more additional functions.
(b) Providing parameter setting, diverse monitoring and diagnosis function using XG5000.
(c) Monitoring function in XG5000 can inspect without program, inspecting external wiring, data setting and
others.
(마침표)
(10) Built-in position control function
(a) Supporting max 100Kpps 2 axes.
(b) Providing parameter setting, operation data collection, diverse monitoring and diagnosis by using
XG5000.
(c) Commissioning by monitoring of XG5000, without program, inspecting external wiring and operation data
setting.
1-3
To Next Page
Loading...
Need help?
General
