Lucent 5ESS DRM User Manual

3.12 Cajun Switch Software Version Procedure
Purpose
The Cajun Switch Software Version Procedure is used to obtain the version number
for the software running on a Cajun switch configured in a DRM network.
Before You Begin
An understanding of the DRM network using the Lucent Technologies Network
Component Solution (LNCS) is required. See, Section 2.7, The DRM Network for more
information.
Required Tools
Access to the ASM with root permission is required.
Required Conditions
Log onto the ASM with root permission. If an HA-ASM configuration is being used,
perform this procedure from the “lead” or “standby” ASM. For more information, see
Section “Accessing the ASM,” in 235-200-145, OneLink Manager Administrative
Services Module User’s Guide.
Required Information
Before beginning this procedure, obtain the IP address for the Cajun switch. This
information should be stored in the office records. The following table provides the
Lucent defined default IP address, a column to record the customer defined IP address
if used, and a column to record the Cajun switch software version number.
235-200-150
April 2004
NETWORK PROCEDURES
Procedure 3.12
Issue 3.00G Page 3.12-1

Lucent 5ESS DRM Specifications

General

Brand	Lucent
Model	5ESS DRM
Category	Control Unit
Language	English