8.8 Perform AMA Data Link Growth
OVERVIEW
The AMA data link provides the hardware interface for the BILLDATS
1
software used
to transmit AMA data to a host collector.
PROCEDURE
1. Enter UNIX
2
RTR Recent Change and Verify.
(a) Is MCC or STLWS terminal to be used?
For MCC, proceed to Step b.
For STLWS proceed to Step i.
(b) At MCC, ensure terminal is in command mode.
(c) At MCC, do Steps d through h.
(d) Type and enter: 199
Response: RCV PARAMETER INFO page displayed with cursor at 1.
database_name
(e) Type and enter: incore
Response: 2. review only
(f) Type and enter: n
Response: 3. journaling
(g) Type and enter: *
Response: RCV INITIALIZATION IN PROGRESS message displayed.
UNIX RTR RCV (ODIN) - Data Entry page displayed.
(h) You have completed Enter UNIX RTR Recent Change and Verify, proceed to
Step 2.
(i) At STLWS terminal, type and enter: RCV:MENU:DATA,RCVECD
Response: RCV ECD PARAMETER INFO page displayed with cursor at 1.
database_name
(j) Type and enter: incore
Response: 2. review only
(k) Type and enter: n
Response: 3. journaling
(l) Type and enter: *
Response: RCV INITIALIZATION IN PROGRESS message displayed.
UNIX RTR RCV (ODIN) - Data Entry page displayed.
2. Enter high-level forms.
1. Registered trademark of AT&T Corp.
2. Registered trademark in the United States and other countries, licensed exclusively through X/Open
Company, Limited.
235-200-150
October 2005
GROWTH AND DEGROWTH
Procedure 8.8
Issue 3.00B Page 8.8-1
To Next Page
Loading...
Need help?
General