8.10 Perform ConnectVu (ATPRC) Data Link Growth
PROCEDURE
1. Type and enter: incore
Response: 2. review only
2. Type and enter: n
Response: 3. journaling
3. Type and enter: *
Response: Enter Form Name:
4. Type and enter: toggle
Response: Enter Form Name:
High-level mode displayed.
5. Type and enter: sdladd
Response: 1. sdl_name
6. Type and enter: ATPRC or SDL6
Response: 2. port
7. Type and enter: 3
Response: 3. ama_baud_rate
8. Enter CARRIAGE RETURN.
Note: This field does not apply for SDL6.
Response: Enter Insert, Change...
9. Type and enter: i
The low-level forms will now be added automatically.
Response: 1. sdl_name
10. Type and enter: <
Response: Enter Form Name:
11. Type and enter: <
Response: Exit this recent change session.
12. To verify SDL6 has been inserted, view the 113 page. SDL6 should appear on this
page.
13. Save Incore ECD changes to disk:
Type and enter: 199
Response: RCV PARAMETER INFO page displayed with cursor at 1.
database_name
14. Type and enter: incore
Response: 2. review only
235-200-150
October 2005
GROWTH AND DEGROWTH
Procedure 8.10
Issue 3.00B Page 8.10-1
To Next Page
Loading...
Need help?
General