8.9 Perform SCC Data Link Growth
PROCEDURE
8.9.1 Start 3BSCC Process if not Already Started
1. At the MCC keyboard, if the UNIX
1
console is not displayed, hold down <ctrl>
and press the Enter.
2. Log in to the UNIX console with the UNIX RTR login.
3. Enter ps —ef | grep 3bscc
Response: root XXXX XXXX 0 11:07:40 ?0:10 3bscc 2
XXXX XXXX is the process number.
4. If you receive the response above, proceed to Procedure 8.9.2. If you don’t receive
the above response, continue with the next step.
5. Enter cd /opt/ATT3bem/var
Response: #
6. Enter pwd
Response: /opt/ATT3bem/var
7. Change the UNEQ to EQIP:
1. Enter vi em_scc
2. Enter w
3. Enter cw
4. Enter EQIP
5. Press the <Esc>
6. Enter :wq
8. Enter pg em_scc
Response: scc_link EQIP
9. Enter /etc/init.d/att3bem stop
Response: #
10. Enter /etc/init.d/att3bem start
Response: #
11. Enter ps —ef | grep 3bscc
Response: root XXXX XXXX 0 11:07:40 ? 0:10 3bscc 2
XXXX XXXX is the process number.
12. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
1. Trademark of SUN Microsystems, Inc.
235-200-150
April 2004
GROWTH AND DEGROWTH
Procedure 8.9
Issue 3.00G Page 8.9-1
To Next Page
Loading...
Need help?
General