4.8 Restore Power to Administrative Workstation (
Netra
1
t 1120 and
Netra
20)
OVERVIEW
Since all peripherals on the Netra t 1120 and Netra 20 are internal, the only power
that needs to be restored is the System Power.
PROCEDURE
1. Connect the DC power cables A and B to the AW. See Figure 4.8-1 (Netra t 1120)
or 4.8-2 (Netra 20).
1. Trademark of Sun Microsystems, Inc.
PCI
1
PCI
2
PCI
3
PCI
4
Figure 4.8-1 — Administrative Workstation Interface Configuration (
Netra
t 1120)
235-200-150
October 2005
ADMINISTRATIVE WORKSTATION MAINTENANCE
Procedure 4.8
Issue 3.00L Page 4.8-1