8.11.2 Update RC/V 8.1 for TDMS/EADAS Data Link
PROCEDURE
1. At the MCC or STLWS, type and enter 196 to enter Recent Change and Verify.
Response: PRINT OPTION CR=N___
DETAIL OPTION CR = N
VERBOSE OPTION CR = N
INPUT Y or N
2. Enter CARRIAGE RETURN 3 times to get to the RECENT CHANGE AND
VERIFY CLASSES page.
3. Type and enter: 8.1u to update recent change view 8.1.
Response: OFFICE PARAMETERS (MISCELLANEOUS) page displayed.
Cursor at OFFICE ID attribute.
4. Type and enter the appropriate OFFICE ID for field 1.
Response: System completes remainder of form.
Enter Insert, Change, Validate, or Print:
5. Type and enter: c
Response: Change Field:
6. For 5E14, type and enter EADAS
Response: Cursor at EADAS LINK attribute.
For 5E15 and later, type and enter TRFM
Response: Cursor at TRFM LINK attribute.
7. Type and enter: y
Response: Change Field:
8. Enter CARRIAGE RETURN
Response: Enter Update, Change, Validate, or Print:
9. Type and enter: u
Response: updating.....FORM UPDATED
OFFICE PARAMETERS (MISCELLANEOUS) page displayed.
Cursor at OFFICE ID attribute.
10. Type and enter: <
Response: 8.0 OFFICE MISCELLANEOUS AND ALARMS VIEWS page
displayed.
11. Type and enter: q to quit Recent Change.
Response: RCV-196 COMPLETED
12. THIS IS A SAFE STOPPING POINT.
235-200-150
August 2004
GROWTH AND DEGROWTH
Procedure 8.11.2
Issue 3.00K Page 8.11.2-1
To Next Page
Loading...
Need help?
General