Table 3.13-1 — DynaStar Router IP Addresses and Software Versions Table
DRM Network Element Lucent IP Address Customer IP Address Version Number
Host DynaStar Router 00 10.10.1.254
Remote DynaStar Router – DRM 1 10.10.9.254
Remote DynaStar Router – DRM 2 10.10.10.254
Remote DynaStar Router – DRM 3 10.10.11.254
Remote DynaStar Router – DRM 4 10.10.12.254
Remote DynaStar Router – DRM 5 10.10.13.254
Host DynaStar Router 01 10.10.1.253
Remote DynaStar Router – DRM 6 10.10.17.254
Remote DynaStar Router – DRM 7 10.10.18.254
Remote DynaStar Router – DRM 8 10.10.19.254
Remote DynaStar Router – DRM 9 10.10.20.254
Remote DynaStar Router – DRM 10 10.10.21.254
Host DynaStar Router 02 10.10.1.252
Remote DynaStar Router – DRM 11 10.10.25.254
Remote DynaStar Router – DRM 12 10.10.26.254
Remote DynaStar Router – DRM 13 10.10.27.254
Remote DynaStar Router – DRM 14 10.10.28.254
Remote DynaStar Router – DRM 15 10.10.29.254
PROCEDURE
1. Establish a telnet connection to the DynaStar router, type and enter:
telnet X
Where: X = the DynaStar IP Address
Response:
Enter service selection
2. Select the DynaStar router CONSOLE service, type and enter:
1
Response:
The software version number will be displayed on the DynaStar router
supervisor page followed by a login password prompt.
3. Exit from the DynaStar router login password prompt, type the Escape key:
[Esc]
Response:
ASM UNIX
1
shell prompt will display.
4. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
1. Registered trademark in the United States and other countries licensed exclusively through X/Open
Company Limited
NETWORK PROCEDURES
Procedure 3.13
235-200-150
April 2004
Page 3.13-2 Issue 3.00G
To Next Page
Loading...
Need help?
General