12. From the Administrative Workstation Main Menu, select "Boot the Workstation."
Answer yes to the confirmation. If you select a task by mistake, answer no to the
confirmation.
Response:
You have chosen to boot the workstation. If the emulator is running,
it must be halted before continuing. Refer to the main menu item of
Halt the Emulator.
Do you want to continue? (yes/no) yes
13. The emulated AM environment is restored automatically, verify that this has
occurred.
14. If the UNIX console page is displayed, switch to the MCC of the AW by holding
down the Ctrl key and pressing Enter (not Return).
15. STOP. YOU HAVE COMPLETED THIS PROCEDURE.
ROUTINE MAINTENANCE
Procedure 5.5
235-200-150
January 2003
Page 5.5-2 Issue 3.00
To Next Page
Loading...
Need help?
General