Note 1: To redirect balance output to the ROP, the logical device port
assignment would be rop0.
Note 2: To determine the logical device for other existing TTY ports, refer to
235-600-3XX, Equipment Configuration Data/System Generation (ECD/SG),
where XX = the manual number associated with the applicable software release.
Response: row
15. Enter CARIAGE RETURN
Response: Change field
16. Type and enter: <ret>
Response: Enter Update, Change...
17. Type and enter: u
Response: class_name
18. Type and enter: <
Response: Enter Form Name:
19. Type and enter: trend
Response: tr_name
20. Type and enter: <ret> 4 times
Response: Enter Execute, Change. . .
21. Type and enter: e
Response: Enter Form Name:
22. Type and enter: <
Response: Transaction ended successfully
23. Continue with “Backup Incore ECD to Disk,” Subprocedure 5.10.3.
ROUTINE MAINTENANCE
Procedure 5.10.2
235-200-150
January 2003
Page 5.10.2-2 Issue 3.00
To Next Page
Loading...