Lucent 5ESS DRM - Page 424

b = member number.
Response: RST TRK OOS CADN COMPLETED
abISMAN
RST TRK OOS PPSRV COMPLETED
abISMAN
(b) Repeat Step a for each trunk group member.
If the talk and monitor hardware is not being added to the STLWS,
continue with Step 13.
11. Update the T/M number view.
(a) Select and prepare terminal for Recent Change and Verify activities.
Reference: Step 6a, substeps 1 through 9.
(b) Type and enter: 1.6
Response: Enter Database Operation
I=Insert, R=Review, U=Update, D=Delete
(c) Type and enter: u
Response: INDIVIDUAL LINE (LINE ASSIGNMENT) page displayed.
Cursor at TN attribute.
(d) Type and enter the appropriate TN.
Response: System completes remainder of view.
Enter Update, Change, Validate, or Print:
(e) Type and enter: c
Response: Change Field:
(f) Update the following attributes.
LEN - assigned locally
LCC - must be the same as the LCC of the MCC
SUSO - Y
Response: Enter Update, Change, Validate, or Print:
(g) Type and enter: u
Response: updating.....FORM UPDATED
INDIVIDUAL LINE (LINE ASSIGNMENT) page displayed.
(h) Type and enter: <
Response: 1.0 LINES –– TN VIEWS page displayed.
12. Update STLWS office data.
(a) Select and prepare terminal for Recent Change and Verify activities.
Reference: Step 6a, substeps 1 through 9.
(b) Type and enter: 14.3
Response: Enter Database Operation
I=Insert, R=Review, U=Update, D=Delete
GROWTH AND DEGROWTH
Procedure 8.3
235-200-150
October 2005
Page 8.3-10 Issue 3.01