(a) Type and enter: toggle
Response: Will take you to the high-level forms.
3. Delete virtual TTY data.
Note: An ! may be entered any time prompted to abort the form and return to
the state when the form was started.
(a) Type and enter: vttydel
Response: vttydel form displayed. Cursor at 1.vtty_name:
(b) Type and enter: TTY name (see the following TTY NAMES list).
Response: Remaining fields will automatically be completed.
Note: To see a list of equipped VTTYs, at a selected terminal, type and
enter the command: OP:CFGSTAT:VIOP;.
TTY NAMES
VTTY0 or tty!
VTTY2 or tty#
VTTY7 or ttyh or VTRAFFPRT
VTTY9 or ttyj
VTTY10 or ttyk
VTTY11 or ttyl
VTTY12 or ttym
VTTY13 or ttyn
VTTY14 or ttyo
VTTY22 or ttyw
VTTY23 or tty8 or VBALANCE
VTTY28 or ttyC
VTTY29 or ttyD
VTTY30 or ttyE
VTTY31 or ttyF
VTTY32 or ttyG
VTTY33 or ttyH
VTTY34 or ttyI
VTTY43 or ttyR or VOFFRECPRT
VTTY45 or ttyT or VCOT
VTTY50 or ttyY
VTTY56 or tty%
VTTY57 or tty’
VTTY58 or tty&
VTTY59 or tty(
VTTY60 or tty_
VTTY61 or tty[
VTTY62 or ttyJ
VTTY63 or ttyV
VTTY64 or ttyW
VTTY65 or ttyX
VTTY66 or ttyZ
(c) Type and enter: d
(d) First prompt: Remove VTTYC x from service. Enter CARRIAGE RETURN
to continue. At DRM MCC terminal, type and enter command:
RMV:VTTYC=x
Where: x = VTTYC number.
Response: RMV VTTYC x COMPLETED
GROWTH AND DEGROWTH
Procedure 8.16
235-200-150
January 2003
Page 8.16-2 Issue 3.00
To Next Page
Loading...
Need help?
General