8.19 Perform SCC Data Link Degrowth
PROCEDURE
1. Type and enter: incore
Response: 2. review only
2. Type and enter: n
Response: 3. journaling
3. Type and enter: *
Response: Enter Form Name:
4. Type and enter: toggle
Response: Enter Form Name:
High-level mode displayed.
5. Type and enter: sdldel
Response: 1. sdl_name
6. Type and enter: SCC or SDL1
Remainder of fields will automatically be populated.
Response: Enter Delete, Validate...
7. Type and enter: d
The low-level forms will now be deleted automatically and you will be prompted
to perform certain functions.
Response: 1. sdl_name
8. Type and enter: <
Response: Enter Form Name:
9. Type and enter: <
Response: Exit this recent change session.
10. To verify SDL1 has been deleted, view the 113 page. SDL1 should not appear on
this page.
Note 1: To save the incore ECD changes made in Steps 1 through 9, execute
Steps 15 through 22, otherwise continue with Step 11.
Note 2: SCC must also be degrown into the MIN ECD. Execute Steps 11
through 14 to test the MIN ECD degrowth capability.
11. Type and enter: 199
Response: RCV PARAMETER INFO page displayed with cursor at 1.
database_name
12. Type and enter: rootdmly
Response: 2. review only
13. Repeat Steps 2 through 9.
14. Save Incore ECD changes to disk:
235-200-150
January 2003
GROWTH AND DEGROWTH
Procedure 8.19
Issue 3.00 Page 8.19-1
To Next Page
Loading...
Need help?
General