reported in the results file. The pathname of the results file is
/app/su/automation/autorslts.
The results file will subsequently be sent to a remote host using one of three file
transfer mechanisms: FTP, RCP, or UUTO. The destination of the results file and the
method used for file transfer are specified in a configuration file on the ASM.
2.12.7.3 Software Update Automation Commands
The complete set of SU Automation commands that can be included in a command file
is as follows:
Command in autocmd file Description
INHIBIT Inhibit SU Automation (turn it off).
ALLOW Allow SU Automation (turn it on).
QUERY_STATUS Determine if SU Automation is ON/OFF.
QUERY_HEALTH Run the SU Automation health check.
QUERY_SCHEDULE Determine if an SU is scheduled for
automatic installation through SU
Automation.
SCHEDULE_SU
BWM98-0001 OFC 12011998 2200
Schedule SU for automatic installation.
An automatic SU install of BWM98-0001 to
the official state should begin on 12/1/1998 at
10pm. Requires all four arguments.
UPDATE_HEALTH_CHECK
XXXXXXXXXXXXXXXXXX
XXXXXXXXXXXXXXXXX
Update health check array (on/off).
where each X = Y|N Y=on, N=off and the
first X is health check 0 the second X is
health check 1 and so on...
UPDATE_OFFICE_PROFILE Update the SU Automation office profile.
INSTATE <stage> <stage> = VFY | SOAK | OFC
SOAKTM HHMM HHMM = SU install soak time.
ALARML
VL
<alvl>
<alvl>
=
MAJOR
|
MINOR
CSCANS <cs> <cs> = Y | N
WARNTM HHMM HHMM = Warning time before SU
Automation begins.
PROCINIT HH HH = Last processor init time (health check).
CLRBWM <clr> <clr> = Y | N
SUNOFF <begin><end> <begin> = HHMM SUNDAY off interval.
<end> = HHMM SUNDAY off interval.
MONOFF <begin><end> <begin> = HHMM MONDAY off interval.
<end> = HHMM MONDAY off interval.
TUEOFF <begin><end> <begin> = HHMM TUESDAY off interval.
<end> = HHMM TUESDAY off interval.
WEDOFF <begin><end> <begin> = HHMM WEDNESDAY off interval.
<end> = HHMM WEDNESDAY off interval.
THUOFF <begin><end> <begin> = HHMM THURSDAY off interval.
<end> = HHMM THURSDAY off interval.
FRIOFF <begin><end> <begin> = HHMM FRIDAY off interval.
<end> = HHMM FRIDAY off interval.
SATOFF <begin><end> <begin> = HHMM SATURDAY off interval.
<end> = HHMM SATURDAY off interval.
END_ARG
a
Indicates the end of the argument list for
UPDATE_OFFICE_PROFILE.
5ESS
®
SWITCH DISTINCTIVE REMOTE MODULE 235-200-150
Feburary 2007
See note(s) at end of table.
Page 2-64 Issue 3.00O
To Next Page
Loading...
Need help?
General