LulzBot TAZ User Manual

Slic3r in Depth
the amount of plastic proportionally and should be changed in very small
steps (e.g. +/- 0.05) as the effects are very visible.
Temperature. These values are also filled from the wizard, but here the
opportunity exists to set the temperature for the first layer (see p.48).
Printer Settings
The Printer Settings will be updated the least, unless Slic3r is going to
be used for many printers, for example, in a 3D printer farm.
56

LulzBot TAZ Specifications

General

Nozzle Diameter	0.5 mm (standard), interchangeable
Print Speed	Up to 200 mm/s
Max Hotend Temperature	300°C
Max Heated Bed Temperature	120°C
Connectivity	USB
Supported Materials	PLA, ABS, HIPS, PVA, PETG, Nylon, TPE, TPU, PC, wood-filled
Print Surface	PEI-coated borosilicate glass bed
Bed Leveling	Automatic
Operating System Compatibility	Windows, macOS, Linux
Power Requirements	100 - 240 VAC
Print Technology	Fused Deposition Fabrication (FDM)