Maestro M1002G - Page 128

To Next Page

To Previous Page

128 Conﬁdential, the whole document is the sole property of Maestro Wireless Solutions ltd.

support@maestro-wireless.com

Main Page

Default Chapter3
- Revision History3
- Table of Contents5
- Conﬁdential, the Whole Document Is the Sole Property of Maestro Wireless Solutions Ltd7
1 Introduction11
- Smartpack Version Command12
- Erasing the Smartpack Application12
- Switch between Wipsoft and Smartpack13
- Reset Smartpack Settings to Default Value13
- Debug Command for IP Communication14
- Change Serial Port Conﬁguration from the USB14
- Force Device LED to be off15
2 Cellular and TCP/UDP Parameters Setup17
- Cellularnetwork Parameters17
  - Activating Cellular Connection18
- TCP/UDP Parameters Setup19
- Extra TCP/UDP Parameters Setup22
3 Automatic and Self-Recovery TCP/UDP Connection25
- Flow Diagram of Auto TCP/UDP Connection Function26
- AT Commands for Auto TCP/UDP Connection27
4 AT Command Driven TCP/UDP Connection33
- Closing Connection Command33
- Opening TCP Connection34
- Opening UDP Connection34
5 Ping Service37
- Setting up and Executing Ping Command37
6 Dynamic DNS39
- Description of Operation39
- Dynamic DNS Server40
- Dynamic DNS Account40
- Updating Dynamic DNS Information41
7 TCP Terminal43
- Description of the Operation43
- TCP Remote Terminal44
8 Mail Sending (SMTP) Service45
- Description of the Operation45
- SMTP Server45
- Email Address46
- Email Subject47
- Email Body48
- Sending an Email49
9 TCP Socket Communication Service51
- Description of the Operation51
- TCP Socket51
- TCP Socket Message52
- Sending a TCP Socket Message53
10 Remote at Command by SMS55
- Description of the Operation55
- Remote at Command by SMS56
- Limitation and Caution When Using Remote at Command56
11 Input/Output Port Control59
- Relationship between Input and Output of I/O Ports59
- I/O Control at Command60
12 Input/Output Triggered at Command63
- Description of the Operation63
  - Activating I/O Triggered at Command64
13 Analog Input Triggered at Command67
- Description of the Operation67
- Activating Analog Triggered at Command68
- Editing High and Low Analog Levels69
14 Call Screening71
- Enabling Call Screening71
- Authorized Phone Number List72
- Reading Authorized Phone Number List72
- Erasing Authorized Phone Number List73
15 Modem Status Check and Monitoring75
- Operation of Modem Status Check and Monitoring76
16 Automatic PIN Entry79
17 Remote Application Update81
- FTP Server81
- Starting Remote Application Download82
- Installing New Application83
- Notes and Cautions to be Taken84
18 Serial to IP Mode and Modbus Conﬁguration85
- Serial to IP Mode Selection85
- Modbus Serial Conﬁguration85
- Examples86
19 Command String - Introduction87
20 Command String - How to Use89
- Command String Format89
- Executing a Command String90
- Editing a Stored Command String90
- Add and Edit Phone Number for Command String SMS Service91
21 Command String - Services - Syntax and Explanation93
- Alarm Service93
- Counter Service94
- Countdown Timer Service95
- Input Port Service95
- Output Port Service97
- SMS Service97
- Email Sending Service98
- Device Power Control Service100
- Analog Input Service (Only Available on M1002G)101
- Socket Communication Service102
22 Command String - Reading Status Ofone Services105
- Command for Reading Current Information of Services105
23 GPS on the M100 3G XT109
- Controlling GPS109
- GPS Information Unsolicited Messages113
- Notes on AGPS114
- Command String GPS Service115
24 Questions and Answersinput117
25 Example of Modem Software Setup and Operation119
26 Command String - Quick Reference125
27 Known Issues127
28 Smartpack Change Log129
29 Related Documents131

Related product manuals

Maestro M1002G - Page 128

Table of Contents

Related product manuals