Example:
Command Response
AT+EMSEND=1 +EMSEND: 0
OK
Note: minimum email (no subject and body) successfully sent
email to email address stored id #1.
AT+EMSEND=0,0,2 +EMSEND: 0
OK
Note: minimum email (no subject and body) successfully sent
email to email address stored id #1 as "bcc" recipient.
AT+EMSEND=1,2,3,1,1,"extra" +EMSEND: 0
OK
Note: email with subject stored with <id>=1; body stored with
<id>=1 and additional body "extra" is sent to:
Address with id# 1 as recipient,
Address with id# 2 as cc recipient,
Address with id# 3 as bcc recipient.
AT+EMSEND=1,2,3,1,1,"extra" +CME ERROR: 3
Note: email sending fail (possible reason: cellular not
connected).
AT+EMSEND=? +EMSEND: [(1-50),(1-50),(1-50),(1-10),(1-4),(128)]
OK
Note:
– As a standard SMTP type email, the body should contain alpha-numeric characters only.
– A "minimum" email contains at least sender’s email address and one recipient address. Subject and body can
be left empty.
– When one email is being sent you cannot send another email. To put a queue of emails please use Command
String "EM" (email sending) service, see Chapter 19.0.1.
50 Confidential, the whole document is the sole property of Maestro Wireless Solutions ltd.
support@maestro-wireless.com
To Next Page
Loading...
