Magellan eXplorist User Manual

93
In the Map Units option of Preferences you can select which units of measure for navigation
data, the north reference, the coordinate system,
and the map datum that will be used by the
eXplorist.
Selecting Navigational Units of Measure
The eXplorist can be set to display navigation data in Miles/Yd/MPH, Miles/Ft/MPH,
NM/Ft/Knots, NM/M/Knots,
or KM/KPH.
1. Press MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Map Units.
5. Press ENTER.
6. Use the Arrow joystick to highlight the data field for Nov
Units.
7. Press ENTER.
8. Use the Arrow joystick to highlight the desired navigational units of measure.
9. Press ENTER.
The Map Units screen is displayed with the new Nav Units shown. You can change other
settings
or press ESC to return to the Preferences menu.

Magellan eXplorist Specifications

General

Resolution	240 x 320 pixels
Battery Life	18 hours
Waterproof	IPX7
Update Rate	1 second
Waypoints	500
Routes	20
SBAS	WAAS/EGNOS
Memory Expandable	No
Screen Size	2.2 inches
Battery Type	2 AA batteries
Dimensions	1.3 inches
Accuracy	3 meters
Dimensions (inches)	1.3"
Maps	Basemap
Weight (oz)	5.3 oz (with batteries)