Magellan eXplorist - Page 125

Selecting the North Reference
You can set the north reference used by the eXplorist to be either magnetic north or True
North.
1. Press
MENU.
2. Use the Arrow joystick to highlight Preferences.
3. Press ENTER.
4. Use the Arrow joystick to highlight Map Units.
5. Press ENTER.
6. Use the Arrow joystick to highlight the data field for North Reference.
7. Press ENTER.
8. Use the Arrow joystick to highIight Magnetic or TRUE.
9. Press ENTER.
94
The Map Units screen is displayed with the new North Reference shown. You can change
other setti
ngs or press ESC to return to the Preferences menu.