IMPULSE®•G+ & VG+ Series 4 Instruction Manual – February 2017
5-15
Special Functions
Table 5-14: Special Function Usage
Access Level (A01-01) Advanced (2)
Motion (A01-02) Traverse (0) Standard Hoist (1)
NLB Hoist
(2)
Function/Control Method (A01-03) V/f (0) OLV (2) FLV (3) V/f (0) OLV (2) FLV (3)
C1: Quick Stop
TM
C1: Reverse Plug Simulation
TM
C2: Micro-Speed
TM
C3: End of Travel Limits
C3: Phantom Stop
C3: Load Sharing/Torque Following
C3: Klixon
C3: Hook Height Measurement
C3: EPLS
C4: Load Float
C5: Load Check II
TM
C6: Swift-Lift
TM
/Ultra-Lift
TM
C7: Torque Limit
C7: Anti-Shock
C8: No-Load Brake Hoist
C8: Brake Answerback
C9: Digital Input Option Set-up
C10: Weight Measurement
C11: Slack Cable Detection
C11: Snap Shaft Detection
C12: Brake Delay Timers
C12: On/Off Delay Timers
C12: Maintenance Timer
C13: Inching Control
C13: Index Control
: Available for the Motion selected
: Not available for the Motion selected