MAK M20 User Manual

Periodical schedule
Distillate fuel
A5.04.01
M20
en / 31.10.2001 AA020780 4/8
Ĺ
Intervall Designation / Doc-Nr.
Work to be carried out
Remarks
---------------------------------------------------------------------------------------------------------------------
-
Periodical maintenance procedures
24 h Compressed air strainer A5.05.05.09.06.00
Maintenance/Cleaning
24 h Turbocharger A5.05.06.05.00.01
Maintenance/Cleaning
see book C
150 h Valve rotor A5.05.01.03.01.00
Inspection/Evaluate
150 h Cylinder head A5.05.01.10.00.00
Inspection/Checking
of all cylinder units
150 h Vorschmierpumpe/Vorschmierung A5.05.08.10.00.00
Wartung/Prüfen
300 h Turbocharger A5.05.06.05.00.01
Maintenance/Cleaning
see book C
300 h Turbocharger A5.05.06.13.01.00
Maintenance/Cleaning
see book C
750 h Cooling water system A4.05.09.01
Inspection/Anti-corrosion oil
750 h Duplex Fuel Filter A5.05.07.12.01.00
Maintenance/Cleaning
1.500 h Valve clearance A5.05.01.01.01.00
Inspection/Adjust
1.500 h Crankcase explosion safety valve A5.05.03.01.01.00
Inspection/Checking
1.500 h Control shaft bedding A5.05.05.01.02.00
Maintenance/Checking
1.500 h Governor
Governor behaviour/Governor control rod
see book C
3.750 h Running gear/Engine timing A5.05.02.01.01.00
Inspection/Checking
3.750 h Timing gear train A5.05.04.08.01.00
Inspection/Checking
3.750 h Actuator A5.05.05.04.01.00
Inspection/Adjust

MAK M20 Specifications

General

Brand	MAK
Model	M20
Category	Engine
Language	English