EasyManua.ls Logo

MAK M20 - Crankcase Monitoring Device Inspection;Checking

MAK M20
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Crankcase Monitoring Device
Inspection / Checking
A5.05. 11.09.01.03
750, 1500, 7500
M20/M25/M32/M43/M453C/M552C/M601C
en / 22.08.2001 IB021758 1/1
11
Ĺ
See also:
Spare parts list: B1.05.11.1.4877
Time requirement: 2 Pers./ 1,00 h
Personnel qualification: skilled engine hand
---------------------------------------------------------------------------------------------------------------------
-
Operating medium: Heavy fuel and distillate fuel
Maintenance:
a) Check the underpressure in the measuring chamber every 750 h
b) Clean the infrared filter and replace the sintered bronze filter
in the measuring attachment every 1.500 h
c) Replace the sintered bronze filter in the pressure control every 7.500 h
Tools:
Test equipment and spare parts.
Service box
Maintenance and trouble shooting: refer to manual C
Attention:
The engine is not monitored in the event of the device malfunctioning.
his can result in engine damage!

Table of Contents