EasyManua.ls Logo

MAK M20 - Pressure Switches A5.05.11.01.02.01; Pressure Switches A5.05.11.01.03.00; RPM Switch A5.05.11.05.01.01; Lubricating Oil;Cooling Water Thermostat A5.05.11.06.01.00

MAK M20
456 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Periodical schedule
Heavy fuel
A5.04.02
M20
en / 31.10.2001 AA021679 4/8
Ĺ
3.750 h Starting fuel limiter A5.05.05.05.01.00
Inspection/Disassembly and reassembly
3.750 h Pressure switch A5.05.11.01.02.01
Inspection/Adjust
3.750 h Pressure switch A5.05.11.01.03.00
Inspection/Adjust
3.750 h Governor
Oil change
see book C
7.500 h Anti-corrosion oil emulsion A4.05.09.02
Changing
7.500 h Inlet and exhaust valves A5.05.01.07.01.00
Inspection/Disassembly and reassembly
of one cylinder unit
7.500 h Piston rings and grooves A5.05.02.07.01.01
Inspection/Checking
of one cylinder unit
7.500 h Compressed air strainer A5.05.05.09.06.00
Maintenance/Cleaning
7.500 h Exhaust manifold A5.05.06.01.01.00
Maintenance/Disassembly and reassembly
7.500 h Injection valve A5.05.07.09.01.00
Repair/Disassembly and reassembly
7.500 h RPM-switch A5.05.11.05.01.01
Inspection/Adjust
7.500 h Lubricating Oil/Cooling Water Thermostat A5.05.11.06.01.00
Maintenance/Checking
7.500 h Oil mist detector A5.05.11.09.01.03
Inspection/Checking
15.000 h Valve guide/Oil scraper ring A5.05.01.05.01.00
Inspection/Replace
at all valves
15.000 h Inlet and exhaust valves A5.05.01.07.01.00
Inspection/Disassembly and reassembly
of all inlet and exhaust valves
15.000 h Cylinder head A5.05.01.10.01.00
Maintenance/Cleaning
15.000 h Big-end bearings A5.05.02.04.01.00
Inspection/Disassembly
of one big-end bearing
15.000 h Main bearings A5.05.02.05.01.00
Inspection/Disassembly
of two main bearings

Table of Contents