MAK M20 User Manual

Periodical schedule
Distillate fuel
A5.04.01
M20
en / 31.10.2001 AA020780 6/8
Ĺ
Intervall Designation / Doc-Nr.
Work to be carried out
Remarks
15.000 h Main bearings A5.05.02.05.01.00
Inspection/Disassembly
of two main bearings
15.000 h Governor drive A5.05.04.08.03.00
Inspection/Disassembly and reassembly
15.000 h Vibration damper on camshaft A5.05.04.09.01.00
Repair/Disassembly and reassembly
15.000 h Exhaust gas turbocharger A5.05.06.05.00.01
Maintenance/Cleaning resp. revision of turbocharger
see book C
15.000 h Fuel feed pump A5.05.07.13.01.00
Maintenance/Disassembly and reassembly
15.000 h Lub oil pump A5.05.08.03.01.00
Inspection/Checking
15.000 h Centrifugal cooling water pump A5.05.09.07.01.00
Maintenance/Disassembly and reassembly
30.000 h Valve rocker A5.05.01.02.02.00
Maintenance/Disassembly and reassembly
30.000 h Valve guide/Oil scraper ring A5.05.01.05.01.00
Inspection/Replace
at all valves
30.000 h Cylinder head A5.05.01.10.01.00
Maintenance/Cleaning
30.000 h Big-end bearings A5.05.02.04.01.00
Inspection/Disassembly
exchange all big-end bearings
30.000 h Main bearings A5.05.02.05.01.00
Inspection/Disassembly
exchange of all bearings
30.000 h Piston rings and grooves A5.05.02.07.01.01
Inspection/Checking
all cylinder units
30.000 h Cylinder liner A5.05.03.04.01.00
Maintenance/Disassembly
at all cylinder units
30.000 h Control valves A5.05.05.09.05.00
Inspection/Checking
30.000 h Exhaust manifold A5.05.06.01.01.00
Maintenance/Disassembly and reassembly
30.000 h Vibration damper A5.05.12.04.01.03
Maintenance/Disassembly and reassembly

MAK M20 Specifications

General

Brand	MAK
Model	M20
Category	Engine
Language	English