Fuel Injector
Maintenance / Disassembly and reassembly
A5.05. 07.07.01.00
M20
en / 06.06.2000 IB022247 3/3
07
Ĺ
2.6 Tighteen the thrust bolts (1 and 2) manually in alternating order, becauce of tapered seat of
the transverse thrust piece (3) on the injection pump.
2.7 First tighten thrust bolt (2) and then thrust bolt (1) with a torque of
M = 85 Nm.
2.8 Tighten nuts ( Fig. 3/15) once again with a torque of
M = 30 Nm.
To Next Page
Loading...