Preservation
Engine
A3.09.00.00
M20-M601C
en / 16.12.1997 BA000114 2/2
Ĺ
Package/Storage: The measures for storage and package depend on period of storage
and storage location.
The short term preservation provides sufficient protection when
stored and placed in well ventilated machine rooms/halls and when
transported on road under European climate conditions.
In case of storage in the open the engine is to be carefully protected
against atmospheric influences with a water restistent tarpaulin or a
plastic foil. Secure tarpaulin/foil against mechanical damages.
Ensure sufficient ventilation below the covering. In Central Europe,
check tarpaulin and preservation regulary every 4 weeks.
In case of bad climate conditions, the measures of a long term
preservation (A3.09.02.nn) are to be carried out and the engine and the
fittings/tools are to be checked below the tarpaulin every 2 weeks.
Found damages are to be immediately corrected. Remove already
existing corrosion and renew preservation.
If there is a danger of frost, sufficient protection must be provided, see
A3.08.01.nn and/or A3.09.02.nn and A4.05.09.nn.
Depreservation: The measures for depreservation (A3.09.03.nn) are to be carried out
according to the implemented measures for a short term preservation
or long term preservation prior to commisioning of the engine!
To Next Page
Loading...