Engine operation panels
110
Read this manual carefully before starting any work!
This is particularly applicable to the chapter General Safety Instructions and the
respective safety instructions in the chapters.
12 Engine Operation Panels
Two models are available from MAN:
12.1 Engine Operation Panel EOP
The Engine Operation Panel (EOP) is optionally offered by MAN for non-classified systems.
12.1.1 General
The Engine Operation Panel EOP (1)
has the following functions:
- Ignition on/off
- Engine start/stop
- Emergency stop
- Monitoring the charge indicator
The Engine Operation Panel EOP is optionally
available.
It can also be ordered subsequently and integrated
using plug connectors in the existing system.
12.1.2 Wiring of the Engine Operation Panel EOP
The EOP is connected to connector X7 of
the electrics case. For connecting cables,
see page 113.
To Next Page
Loading...