Interface CAN-2 touch display
147
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
18.2.12 Engine Hours
Transmission repetition rate: 1000 ms
Data length: 8 bytes
Identifier: 0x18 FE E5 27
Byte 1…4: Total engine hours of operation
0.05 h per bit
0 h offset
Range: 0 ... 210 554 060.75
SAEJ1939-71: SPN 247
Byte 5 - 8: Total engine revolutions
0x FF FF FF FF
Not supported
18.2.13 Fuel Economy
Transmission repetition rate: 100 ms
Data length: 8 bytes
Identifier: 0x18 FE F2 27
Byte 1, 2: Fuel rate
0.05 l/h per bit
0 l/h offset
Range: 0 ... 3212.75 l/h
SAEJ1939-71: SPN 183
Byte 3 - 8: Default Value = 0xFF FF FF FF FF FF
Not supported
18.2.14 Fuel Consumption
Transmission repetition rate: 1000 ms
Data length: 8 bytes
Identifier: 0x18 FE E9 27
Byte 1…4: Engine Trip Fuel
0.5l per bit, 0l offset
Range: 0 … 2105540607.5l
SAEJ1939-71: SPN 182
Byte 5…8: Engine Total Fuel Used
0.5l per bit, 0l offset
Range: 0 … 2105540607.5l
SAEJ1939-71: SPN 250
To Next Page
Loading...
Need help?
General