Installation
56
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
8 Installation
8.1 Safety instructions
For safety reasons, we recommend that the entry to the engine room be marked with a “No Entry” sign and
that operating personnel be informed that they are responsible for the safety of the individuals who enter
the engine room.
Personnel
Installation and commissioning may only be performed by MAN employees or specialists trained by MAN.
NOTICE
Risk of damage to the engine due to improper installation/commissioning
For this reason:
S Install the components properly.
S Maintain the prescribed bolt-tightening torques.
S Commissioning is performed exclusively by trained personnel.
S Secure components so that they do not fall down or turn over.
To Next Page
Loading...
Need help?
General