EasyManuals Logo
Home>Man>Marine Equipment>iSea

Man iSea User Manual

Man iSea
172 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #144 background imageLoading...
Page #144 background image
Interface CAN-2 touch display
142
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
18.2.6 Fluid Level Pressure
Transmission repetition rate: 50 ms
Data length: 8 bytes
Identifier: 0x18 FE EF 27
Byte 1: Engine fuel delivery pressure
40 mbar per bit
0 mbar offset
Range: 0 bar ... 10 bar
SAEJ1939-71: SPN 94
Byte 2: Extended Crankcase Blow-by Pressure
0x FF
Not supported
Byte 3: Engine oil level
0.4 % per bit
0 % offset
Range: 0 % ... 100 %
SAEJ1939-71: SPN 94
Byte 4: Engine oil pressure
40 mbar per bit
0 mbar offset
Range: 0 bar ... 10 bar
SAEJ1939-71: SPN 100
Byte 5, 6: Engine crankcase pressure
0x FF FF
Not supported
Byte 7: Engine coolant pressure
10 mbar per bit
0 mbar offset
Range: 0 bar ... 5 bar
SAEJ1939-71: SPN 109
Byte 8: Engine Coolant Level
0.4 % per bit
0 % offset
Range: 0 % ... 100 %
SAEJ1939-71: SPN 111
only two states supported:
0 % Low level detected
100 % No low level detected

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Man iSea and is the answer not in the manual?

Man iSea Specifications

General IconGeneral
BrandMan
ModeliSea
CategoryMarine Equipment
LanguageEnglish