General safety instructions
11
Read this manual carefully before starting any work!
This is particularly applicable to the chapter “General Safety Instructions”
and the respective safety instructions in the chapters.
2.3 Conversions and modifications to the engine and aftertreatment system
To avoid dangers and to safeguard optimal performance, neither modifications nor attachments or
conversions should be made on the engine or the aftertreatment system that have not been expressly
approved by MAN.
If modifications are made without the written consent of MAN, any obligation of guarantee or warranty on
the part of MAN for damage and defects that are attributable to the unauthorized modification becomes null
and void. Moreover, MAN does not assume any liability for damage caused by modifications that have not
been approved.
Any deviation from these instructions resulting in improper installation or connection of MAN aftertreatment
system may be considered an emission related defect requiring the OEM or installer to report to MAN
immediately. MAN is required to report any emission related defects to the U.S. EPA pursuant to 40 C.F.R.
§ 1068.261 (h) within 15 days.
OEM installations are subject to audit by MAN pursuant to 40 C.F.R. § 1068.261 (d)(3), as further set forth
in the delegated final assembly agreement.
To Next Page
Loading...
Need help?
General