Maintenance overview
5.2 Maintenance plans
09.03.2018
Maintenance manual 3 302 744 en 5 - 3
GMK5250L
5.2 Maintenance plans
The descriptions for certain maintenance work for the maintenance plans D,
W, M 1 to M 12 and Y 2 to Y 10 are provided for
– the carrier in chapter 7 and for
– the superstructure in chapter 8.
References (chapter and page number) to the description of this mainten-
ance work can be found after the respective maintenance work for carrier
and superstructure.
The section titles
– of chapter 7 Maintenance work on the carrier and
– of chapter 8 Maintenance work on the superstructure
contain the symbol (D to Y 10) of the relevant maintenance plan for better
comprehension.
In addition to the Maintenance work on the carrier and the Maintenance
work on the superstructure chapter 6 also lists the Lubricants and consum-
ables:
– The designations of the oils/lubricants in accordance with Lubricants list,
p. 6 - 2.
– The amounts as approximate values for oil amounts in litres (l) (and US
gallons (gal)) (the exact oil amounts can always be determined by the oil
level inspection holes, the oil dipsticks or the oil level indicators)
Lubricant
applications list
, p. 6 - 3.
H
Items that are only available with additional equipment are designated
accordingly in chapter 7 and chapter 8.
H
Maintenance work on the engines over and above the daily and weekly
checks is only partially described in this maintenance manual. When carry-
ing out such maintenance work, follow the instructions in the
Engine manu-
facturer documentation
supplied.
To Next Page
Loading...
Need help?
General
