Mark-10 F Series User Manual

Series F Test Frames + IntelliMESUR
®
Software User’s Guide
33
TOC 
Deflection Compensation
Force sensors and test frames deflect under load, affecting the accuracy of distance
measurements. Series F test frames and force sensors are compensated at the factory.
To account for deflection within grips or fixtures associated with the test, IntelliMESUR provides a
utility for additional compensation. For instructions on running this utility, refer to the Deflection
Compensation section. When this process has been completed and the file has been saved,
browse to the desired file in this panel.
Description
Optionally type a test description, which can be useful in identifying tests at a later date. Example:
When opening a test, the description appears to the right of the file listing, as follows:
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com

Mark-10 F Series Specifications

General

Brand	Mark-10
Model	F Series
Category	Test Equipment
Language	English