ENGLISH
OPERATOR'S MANUAL
10
Cod. EKE0002OM
2. TECHNICAL INFORMATION
2.1. Tractor Requirements
• Road-drive is permitted only if the bale chamber is empty.
• Maximum permitted speed: 20 kmph
• As for the machines that are not equipped with brake, deadweight of the tractor should
meet the given specifications or otherwise at least have a weight suitable with
deadweight of the baler.
• Observe the given conditions for machines with operating permit.
Minimum power requirement : 50-60 HP
PTO Drive : 540 rpm
PTO drive of tractor must not exceed 540 rpm.
Please provide each user of the machine to read this User and
Service Manual carefully. Keep this booklet as a quick reference
guide.
• Bolts, nuts, shims on sections and parts of the machine might be unscrewed during
passing hubbly and stony roads when the machine is connected to tractor with
maximum highest speed. In this case, damages and malfunctions can be occurred
during the running of machine. Required solution is to screw bolts and nuts by
checking at every workday.
To Next Page
Loading...
