OPERATOR'S MANUAL
ENGLISH
Cod. EKE0002OM
5
IDENTIFICATION
Every single equipment is equipped with an
identification plate (Fig. 1) whose data shows:
1. Mark and address of the Manufacturer;
2. Designation of the machine;
3. Type of machine;
4. Serial number of the machine;
5. Max. unladen mass (kg);
6. Max. laden mass (kg);
7. Production year;
8. EC and EAC marking;
9. “Made in” and QR code;
It is advisable to transcribe your data on the serial
number below shown on the date of purchase (10)
and the name of the dealer (11).
10. ____________________
11. ____________________
These data should always be quoted for any need for
service or spare parts.
(9)
(1)
(2)
(3)
(4)
(5)
(6)
(7) (8)
Fig.1
ATTENTION
Do not remove, tamper with or make the CE mark
affixed on the machine illegible.
Refer to the information provided on the CE mark
for the manufacturer’s contact details (e.g. for
requesting spare parts, etc.).
When the machine is demolished, destroy the CE
marking.
To Next Page
Loading...
