Maschio PITAGORA INLINE - PITAGORA INLINE Baler Technical Specifications

OPERATOR'S MANUAL
ENGLISH
Cod. EKE0002OM
11
2.2. PITAGORA INLINE Baler Technical Specifications
PITAGORA INLINE technical specifications are given in Table 2.2.1.
NOTE: Our company reserves the right to make changes on dimensions without notice.
Table 2.2.1: PITAGORA INLINE Technical Specifications
PITAGORA INLINE
PICK-UP SYSTEM
Width mm 1930
Bar Gap mm 66
Tine Bars 4 bars
Number of Tines Pcs 112
BALE CHAMBER
Stroke mm 550
Piston Speed
Stroke /
min.
105
Feeding Opening cm² 1410
BAL
E SPECIFICATIONS
Bale Dimensions mm 360 x 460
Bale Length mm 300 – 1350
Bale Weight
kg
20 – 35
Productivity Bale / h 280
Knotter Set 2 twines
TRANSPORT DIMENSIONS
Right Tire 10,0 / 75 – 15,3 Tubesless 10 PLY
Left Tire 10,0 / 75 – 15,3 Tubesless 10 PLY
Support Wheel 300x100 pr
Weight kg 1850
Length of Baler (on road) mm 4650
Length of Baler (on duty) mm 5570
Width of Baler mm 2600
Height of Baler mm 1820
Minimum Power
Requirement
HP 45
PTO
1/min.
540
Transmission 1 Shaft