ENGLISH
OPERATOR'S MANUAL
18
Cod. EKE0002OM
• Place the disconnected PTO shaft on recommended connection mount!
• Attach the cover on PTO shaft end after removing PTO shaft!
• If any damage occurs, fix the problem before operating the machine!
3.7.3. Hydraulic system
• Hydraulic system is under pressure, Be Careful.
• Ensure that hydraulic hoses are connected properly when making connections with
hydraulic cylinders and engines.
• Make sure that there is no hydraulic mechanism under pressure or still running on both
tractor and vehicle before installing hydraulic hoses to hydraulic connections on the
tractor!
• Coupling muffs and cables should be considered to ensure proper hydraulic
connection between tractor and vehicle. If connections are reversed, so will the
function will be reversed. (i.e.; increase/reduce)- accident risk!
• Check hydraulic hose sets periodically, and replace if damaged or worn. New hoses
should meet technical requirements specified by vehicle manufacturer!
• Use appropriate tools to avoid risk of injury when checking for leaks!
• Fluids (hydraulic oil) leaking from high pressure may cause damage on skin and result
in some severe injuries! Seek medical aid in case of injury! Infection risk!
3.7.4. Tires
• Make sure the vehicle is set off on the ground and prevented against risk of rolling
when performing work on tires! If the machine is on an inclined surface, place wheel
chocks, etc. obstacles in front of the tires on the side of inclination to prevent skidding
of the machine.
To Next Page
Loading...
