OPERATOR'S MANUAL
ENGLISH
Cod. EKE0002OM
17
• Ensure that selected PTO shaft tractor speed matches permitted tool speed before
installing PTO shaft!
• Make sure that no one around the tool is in danger before attaching PTO shaft!
• Never connect PTO shaft while engine is running! Stop the engine and remove ignition
key when attaching PTO shaft! Safeguard the flywheel using the emergency break.
• No one should be in the perimeter of the wheel while PTO shaft is running!
• Always shut down PTO shaft when it is not needed or if the angle is too large!
• CAUTION! Flywheel will continue running for a while after disconnecting PTO shaft.
Keep the tools clear in the mean time! Do not perform any work with tools until
machine comes to complete stop and flywheel is safeguarded using emergency break!
• Do not connect the PTO shaft to driving vehicles without cleaning and lubrication.
To Next Page
Loading...
