Maschio PITAGORA INLINE - Protection of Mechanical Systems; Shaft Connection Procedures

ENGLISH
OPERATOR'S MANUAL
16
Cod. EKE0002OM
• Sections operated by external forces (i.e., hydraulics, collector assembly) may
result in crushing and cutting injuries!
• Set the tools down on the ground, stop the engine and remove ignition key before
leaving tractor!
• No one should be present between tractor and baler before ensuring that the
vehicle is absolutely stopped.
3.7.1. Protection of Mechanical Systems
Mechanical systems of the machine should be checked before and after operating
the machine to prevent any jams or presence of foreign objects.
3.7.2. Shaft Connection Procedures
• Only use PTO shafts specified by the manufacturer!
• Make sure that shaft covers are in place while machine is running!
• Disconnect power take-off, stop the engine and remove ignition key after installing or
removing PTO shafts!
• Ensure that PTO shaft is installed and protected properly!
• Attach chain to prevent rotation of PTO shaft guard along with the shaft itself.