4. Write Fetch Data = 1
5. Data for record number 7 to 14 will be loaded into data registers
6. Write Fetch data = 1
7. Data for record number 15 to 21 will be loaded into data registers
8. Write Fetch data = 1
9. Data for record number 22 to 28 will be loaded into data registers
10. So in same menner data registers will be filled with 7- 7records.
11. After all data fetch Write Hold Event Data = 0.
Note :
In Event data fetching, total number of records fetched will be vary from Total number of
Records fetched minus 0 to 14.e.g. total number of fetched records are 1000 then in file
records will be 986 to 1000.
To Next Page
Loading...
Need help?
General