12 Chapter 1: Before you begin
Inspecting your Matrox Iris GTR package
You should check the contents of your Matrox Iris GTR package when you first
open it. If something is missing or damaged, contact your Matrox representative.
Matrox Iris GTR with Design Assistant base package
If you purchased the Matrox Iris GTR with Design Assistant base package, it
includes the following:
• Matrox Iris GTR smart camera. This includes the Matrox Design Assistant
runtime environment, the MIOS operating system, and some preloaded utilities
(for example, Putty, FileZilla, and Virtual Network Computing). It also includes
a run-time license for some common Matrox Design Assistant steps; for a detailed
list of steps that are included, please visit our website
http://www.matrox.com/imaging/en.
•IP lens case.
• VGA/USB connector cap.
• Liquid lens connector cap.
• Matrox Design Assistant DVD.
❖ Note that your Matrox Iris GTR base package does not include any cables, a power
supply, or a manual iris lens. To purchase these items, contact a Matrox sales
representative.
Matrox Iris GTR with MIL-only base package
If you purchased the Matrox Iris GTR with MIL-only package, it includes the
following:
• Matrox Iris GTR smart camera, pre-installed with the Windows 10 IoT enterprise
operating system, and a run-time license for MIL. The run-time license includes
the industrial and robot communication module. This might change over time;
contact your Matrox representative for more information. This license also allows
for Distributed MIL configurations.
•IP lens case.
To Next Page
Loading...
